Mody-pumps G 554 T Manuel d'utilisateur

MODELS: G 530 T, G 554 T OPERATING INSTRUCTIONS, INSTALLATION & MAINTENANCE MANUAL INCLUDING SPARE PARTS LIST

5. FIT COMPLETE ROTOR ASSEMBLY IN STATOR HOUSING GUIDING UPPER BEARING IN TOP BRACKET BEARING SEAT. TIGHTEN FOUR CAP SCREWS (44). FIT UP

PARTS CATALOG 1. COMPONENTS LIST : AS PER DRAWING NO. DW/136/00 (SHEET 1 & 2). 2. SPECIAL TOOLS : S.NO. TOOL PART NO.

PUMP MODEL G530T/E VER - 1.5D.NO. PART # DESCRIPTION QTY1 065-016-79 CABLE AWG 10/4 SOOW 50'2 660-093-00 CABLE GLAND & GRIP 13 085-022-21 CAB

PUMP MODEL G530T/E VER - 1.5D.NO. PART # DESCRIPTION QTY47 535-022-00 MECHANICAL SEAL 248 080-005-21 CIRCLIP 249 545-008-21 SEAL HOUSING 150 650-003-2

PUMP MODEL G554T/E VER - 1.5 10/6/2008D.NO. PART # DESCRIPTION QTY1 065-016-79 CABLE AWG 10/4 SOOW 50'2 660-093-00 CABLE GLAND & GRIP 13 085-

PUMP MODEL G554T/E VER - 1.5D.NO. PART # DESCRIPTION QTY47 535-022-00 MECHANICAL SEAL 248 080-005-21 CIRCLIP 249 545-008-21 SEAL HOUSING 150 650-003-2

LLIIFFEE IISS PPRREECCIIOOUUSS -- TTHHIINNKK SSAAFFEETTYY 1. Most accidents can be avoided by using COMMON SENSE. 2. Please read the

LIMITED WARRANTY We warrant to our immediate customer and to the ultimate consumer that products of our manufacture will be free of defects in ma

INTRODUCTION THE “mody” MOTOR DRIVEN PORTABLE SUBMERSIBLE PUMPS HAVE BEEN DEVELOPED DUE TO A LONG FELT NEED OF HAVING A TRULY MAINTENAN

OVERALL DIMENSIONS AND WEIGHT. G 530T G 554T OVERALL HEIGHT 28”(APPROX.)/711MM 31”(APPROX.)/790MM

12. FULL LOAD AMPS AT 460V IS 14AMPS (G554), 11.5AMPS (G530) & AT 400V IS 16 AMPS (G554), 12.5AMPS (G530) 13. ENSURE CORREC

TECHNICAL DESCRIPTION. THE MODY SUBMERSIBLE PUMP IS IN ITSELF A COMPLETE PUMPING STATION. BESIDES A POWER SUPPLY AND A DISCHARGE HOSE

THE SEAL CHAMBER THE HEART OF THE MODY PUMP. TANDEM MECHANICAL, TUNGSTEN CARBIDE V/S TUNGSTEN CARBIDE SEAL FACES (LOWER SEAL) AND TUNGST

ELECTRICAL INFORMATION. MOTORS ARE DESIGNED TO OPERATE ON SINGLE VOLTAGE AND FREQUENCY. MAX. DEVIATION IN VOLTAGE ALLOWED IS + - 6 % A

8. REMOVE THE FOUR NOS. DEEP SEATED CAP SCREWS (44) THAT HOLD THE LOWER BEARING BRACKET AGAINST THE INNER CASING. BY MEANS OF TWO NOS. SC